Back
A Detailed Guide to Bomb Making!
Written By: Max Johnson
Non-Fiction
Step 1: Get 2 Toxins and 1 Air canisters from the room right across from the Toxins lab. Step 2: Wrench them into place on the Connector Ports. Step 3: Move 1 of the canisters to the bottom most connector port. Step 4: Open the interior airlock and set the pressure to 4500KP. Step 5: Open the manual Valve and flood the room with plasma then use the igniter to light it. Step 6: place on of the yellow canisters right above the other canister and wrench it into place. Step 7: When the canister is full dispense and put a plasma tank in the Canister you just filled with Hot Air. Step 8: Get a air canister and fill and air tank to maximum pressure. Step 9: Use Screwdriver on how you want your bomb to be set off (Timer, Proximity sensor, Remote signaling device). Step 10: Connect all of the parts to the Tank transfer bomb and test at the testing range!How to make bombs in 10 steps